The 18V Brushless Hammer Driver Drill provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length, this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications. Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model.| 3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering) for drilling in masonry up to a maximum 16mm hole diameter.| LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application.| High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.| 2 Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.| All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability and will continue to perform in years to come.| XPT – Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability.| Impact Rate:    Hi: 0 - 31,500ipm    Lo: 0 - 8,250ipmMax. drilling capacities in masonry: 16mmMax. drilling capacities in steel: 13mmMax. drilling capacities in wood:    Auger bit: 50mm    Self-feeding bit: 76mm    Hole saw: 152mmMax. lock torque: 125NmMax. tightening torque:    Hard: 130Nm    Soft: 65NmNo Load Speed:    Hi: 0 - 2,100rpm    Lo: 0 - 550rpmSkin weight: 2.1kgVoltage: 18VWeight (with battery): 2.1kg